Are you a School,University or Business? Click here to find out how to place a purchase order
AX-18A Smart Robotic Arm Key Features
The AX-18A Smart Robotic arm features more speed and more torque for the user who wants maximum performance from their robotic arm. Key features include:
Fully MATLAB, LABVIEW, Flowstone Compatible!
2 - 3 pound (.907kg) lifting capability
Offers more speed and torque than the AX-12A Smart Robotic arm (AX-18A - 18kgf/cm and 97 rpm vs. AX-12A - 15kgf/cm and 59 rpm)
The only robotic arms that feature feedback for position, voltage, current and tempertature
Rugged, all aluminum construction for maximum accuracy
Hard Anodized finish for maximum scratch and corrosion resistance
(1) CD-ROM which includes the powerful Roboplus Task, Manager and Motion editor software for complete control of the AX-18A Smart Robotic Arm
(1) LN-101 USB Downloader - Connects the CM-700 to your computers USB port
$1,130.00
With CM-510 Controller
AX18ACM510 New!
(1) AX-18A Robotic Arm Hardware kit with sensor engineered gripper
(1) Fully Illustrated Construction Guide
(7) AX-18A Servos
(1) CM-510 Controller, Battery, PC to CM-510 Serial Cable, Power Supply
The CM-510 is the same controller as the CM-5 with the addition of (5) AX-12 buss's, (1) Comm Port (6) External ports for sensors and (1) embedded MIC.
$1,165.00
Accessories
Kit
Part Number / Description
Price
Nomad Rover
NomadFK
Go mobile with the Nomad Rover! The Nomad Rover was designed for the SG and AX series of robotic arms and installs in seconds with just 3 screws!
For more information, visit the Nomad Rover product page
12 Volt/5amp power supply provides plenty of power for the AX-18A Smart Robotic Arm
(1) 12Volt/5Amp Power Supply (requires AX12A/AX18A Power Harness)
$89.00
AX-12A/AX-18A Power Harness
AX-12A/AX-18A Power Harness
The AX-12 power harness makes powering the AX-12A / AX-18A Smart Robotic Arm or any AX-12A/ AX-18A network quick and easy! Combine this connector with CrustCrawler's AX-12A/AX-18A power supply for a complete AX power system.
(1) Power Harness
(1) 2.1mm male P5 barrel plug
(2) 3 pin molex connectors for easy AX-12A / AX-18A and USB2Dynamixel connections
$19.00
Flexiforce Pressure Sensor
Flexiforce Pressure Sensor
The active sensing area is a .375" diameter circle at the end of the sensor. The conductive leads are easy to connect to a breadboard or through-hole area. The Flexiforce has an ideal output for A/D conversion - 0V is no force and 4.2V is 100 lbs. The RCTIME command may be used with a LOOKUP table or calibration formula to execute some math to make the output useful.
